948 949 optional: control unit for pneumatic presses pneumatic press pistol tool for discrete wires and jumper wires ap-2 ap-2d mp-cu ap-2h id applicator for 1.27mm(.050") pitch ribbon cables id applicator for discrete wires and jumper wires id applicator for 1.27mm(.050") pitch ribbon cables pneumatic press pneumatic press specifications ?dimensions: (w x l x h)141 x 252 x 301mm (5.6" x 9.9" x 11.9") ?weight: approx. 16kg(35lb) ?air pressure: 490 to 690 kpa (5 to 7 kgf/sq.cm) ?strokes: 50 max./minute ?pressure output: approx. 3.8kn (390 kgf) when air pressure is 490 kpa (5 kgf/sq.cm) ?operation method: air-operated foot valve ?dies: applicator replacement note: for the hr connectors, please use ap-2h press that provides bigger pressure output. the filter regulator & pressure switch help to make reliable operation even under the air condition is not stable. light and compact. specifications ?dimensions: (w x l x h)200 x 300 x 230mm(7.9" x 11.8" x 9.1") ?weight: approx. 5kg(11 lb) ?power source: 100/115/220/240v ac, single-phase, 50/60 hz ?air pressure: 490 to 686 kpa (5 to 7 kgf/sq.cm) ?accessories: foot switch, power cord versatile press applicable to various id applicators. specifications ?dimensions: (w x l x h) 184 x 302 x 491mm (7.2" x 11.9" x 19.3") ?weight: approx. 30kg(66 lb) ?air pressure : 490 to 690 kpa (5 to 7 kgf/sq.cm) ?strokes: 50 max./minute ?pressure output: approx. 7.5kn (approx. 760 kgf)when air pressure is 490 kpa (5 kgf/sq.cm) ?operation method: air-operated foot valve ?dies: applicator replacement idb-12 specifications ?dimensions: (w x l x h)23 x 135 x 175mm (.9" x 5.3" x 6.9") ?weight: 270g(1lb) ?dies: head adaptor (idh series) replacement ?compact, light and maintenance free. no inspection or lubrication is necessary. specifications ?dimensions: (w x l x h)141 x 252 x 301mm (5.6" x 9.9" x 11.9") ?weight: approx. 16kg(35lb) ?air pressure: 490 to 686 kpa (5 to 7 kgf/sq.cm) ?strokes: 50 max./minute ?applicable connectors: jst's ra, rc & rx connectors ?pressure output: approx. 3.8kn (approx. 390 kgf) when air pressure is 490 kpa (5 kgf/sq.cm) ?operation method: air-operated foot valve ?dies: applicator replacement application tooling the arrow mark indocates the press that is applicable to the applicator. id tools and machines id tools and machines 5-b mkd-lp h2 series id applicator for discrete wires id applicator for discrete wires and jumper wires pneumatic press pneumatic press hand press auto. id machines for discrete wires bcd-m5bp auto. id machines for shielded wires scd-m15b auto. id machines for multi-harnesses cam-m12b note: mkd-lp applicators are not applicable to the connectors with glass-filled nylon housings i.e. 12 to 15-circuit dd/ds connectors and 13 to 16-circuit kr connectors. specifications ?dimensions: (wxlxh)95x515x203mm (3.7"x20.3"x8.0") ?weight: approx. 6.5kg(14lb) ?applicable press: ap-k2n ?applicable connectors: jst's connectors for discrete wires. auto. id machines for 2.5 mm (.098") & 2.0 mm (.079") pitch jumper wires rcd-m9be simple and compact pneumatic press without electrically controlled unit. specifications ?dimensions: (wxlxh)180x150x250mm (7.1"x5.9"x9.8") ?weight: approx. 10kg(22lb) ?air pressure: 490 to 690kpa (5 to 7kgf/sq.cm) ?dies: dies-main body integrated ?strokes: 50 max./minute specifications ?dimensions: (w x l x h)130 x 280 x 383mm (5.1" x 11.0" x 15.1") ?weight: approx. 7kg(15 lb) note: the difference between the hpd-m2a and the hpd-m2a-hid is the main shaft. hpd-m2a is for the h2a series applicators hpd-m2a-hid is for the hid series applicators hpd-m2a hpd-m2a-hid mkd-lp+ap-k2n mp-2a h2a series fp series hid series pneumatic press for 1.27mm(.050") ribbon cable connectors. operation is easy and safe as the connector and cable can be set while the sliding applicator is drawn out of the terminating section. versatile press applicable to various id applicators.
950 951 pneumatic press: ap-2h electric press: ap-k2n 1.5(.059) applicator connector pitch mm(in.) series ribbon cable cutter mkd-lr with die set fp series idh series pneumatic press: ap-2d applicator pistol tool: idb-12 head adaptor 2.0(.079) 2.5(.098) 2.54(.100) 3.96(.156) sur sr ssr asr cz zr za kr( note3 ) krd ck( note4 ) cr dr da dd ds nr nrd hr db dg br ra rc rx vr e e e e e e e mkd - lr + mkd-lr-ds-kr e e e e mkd - lr + mkd-lr-ds-da e e mkd - lr + mkd-lr-ds-hr mkd - lr + mkd-lr-ds-db e e e e e e e e e e e e e e e e e e e e e e e e e e e fcd-ds fp2-ra/rx fcd-ds fp2-rc fcd-ds fp2-ra/rx e e e e e e e e idh-zr12 e idh-kr12 e e e idh-dr12 idh-da12 idh-nr12 e idh-hr12 idh-db/dc12 e e e e e idh-vr12 e idh-dd/ds12 0.8(.031) 1.0(.039) 1.5(.059) hand press: hpd-m2a hand press: hpd-m2a-hid applicator applicator applicator pitch-feeding applicator connector pitch mm(in.) series 2.0(.079) 2.5(.098) 2.54(.100) 3.96(.156) ribbon cable cutter sur sr ssr asr cz zr za kr ( note 3 ) krd ck ( note 4 ) cr dr da dd ds nr nrd hr db dg br ra rc rx vr h2a-sur h2a-sr h2a-ssr h2a-asr h2a-cz h2a-zr h2a-za h2a-kr/xr h2a-krd h2a-kr/xr h2a-cr h2a-dr H2A-DA h2a-nr h2a-nrd h2a-hr h2a-db h2a-dg h2a-br e e e h2a-vr e h2a-dd/ds h2-sur30ed-x h2-sr20ed-x h2-ssr20ed-x h2-asr20ed-x h2-cz20ed-x h2-zr20ed-x h2-za20ed-x h2-kr/xr20ed-x h2-krd20dd-y h2-kr/xr20ed-x h2-cr20ed-x h2-dr20ed-x h2-da20ed-x h2-nr20ed-x h2-nrd20dd-y h2-hr20ed-x h2-db20ed-x e h2-br20ed-x e e e h2-vr15dd-y e h2-dd/ds20ed-x e e e e e e e e e e e e e e e e e e e hid-ra/rx hid-rc hid-ra/rx e hid-fc e e e e e e mkd-lp + mkd-ds-zr mkd-lp + mkd-ds-za mkd-lp + mkd-ds-kr ( note 1 ) e e e mkd-lp + mkd-ds-dr mkd-lp + mkd-ds-da mkd-lp + mkd-ds-nr mkd-lp + mkd-ds-nrd ( note 2 ) mkd-lp + mkd-ds-hr mkd-lp + mkd-ds-db/dc mkd-lp + mkd-ds-dg mkd-lp + mkd-ds-br e e e mkd-lp + mkd-ds-vr ( note 2 ) e mkd-lp + mkd-ds-dd/ds ( note 1 ) 1.0(.039) 0.8(.031) hand press: hpd-m2a pneumatic press: ap-2 or ap-2h pneumatic press: ap-2h electric press: ap-k2n h2a series h2 series hid series mkd-lp with die set id tools id tools 5-b note 1: mkd-lp applicators are not applicable to the connectors with glass- filled nylon housings i.e. 12 to 15-circuit dd/ds connectors and 13 to 16-circuit kr connectors. note 2: end-connection only (not through processing) note 3: id tools for the standard kr series connectors are not applicable to the ( )kr-4k-** connectors. for ( )kr-4k-**, use the tools for the cr series connectors. note 4: id tools for the standard ck series connectors are not applicable to the ( )ck-6h-** connectors. for ( )ck-6h-**, use the tools for the kr/xr series connectors.
|
